Drywall Repairs Made Simple

By the time you finish reading this article, you will be able to perform basic repairs to damaged drywall. There are some basic tools that you should keep around the house, if you have an active family and are prone to get dings in the walls. This article will not provide enough information to do major repairs to drywall. Major repairs are simple, but you must learn the basics first.

Here is a list of some tools you will need. Your local big box can supply you with some basic tools. They run in price range from cheap to professional quality. They have plastic putty knives for less than a dollar all the way up to stainless steel that with care, will last a lifetime. If you expect a very small number of repairs, the plastic will suffice. Also, get a carriage bolt, a small hammer, a can of drywall joint compound, 150 to 220 grit sandpaper and a paint brush. These basic tools will repair most small dings and dents in drywall.

An example of a ding would be where the locking button on a door knob has left an impression in the wall behind it. This is typical of a quick and easy repair. Look at the damage. Is there anything protruding above the wall surface? If so, use the carriage bolt to push the protrusion below the wall surface. Use the hammer to help persuade the protrusion to go below the surface of the wall and round the edges. Next, take the putty knife and some joint compound or as it is commonly called, drywall mud, and fill the hole. Wait until the mud dries, sand lightly and fill the hole again to bring the material to the same level as the wall. Sand the surface again until the wall is smooth and level. Do not over sand. This will rough up the drywall allowing the paper to fray and requiring more mud to seal the rough surface. There should not be any differences in the surface. Several small applications will last much longer than one large application and give you better results.

Is everything smooth? If not, apply some more drywall mud to even the wall surfaces. Sand again. When the wall is smooth, apply the paint primer. When the paint primer is dry, apply your regular wall paint. The paint primer is to seal the wall so the new paint does not dry too quickly allowing the patch to be visible.

That is the basic method of repairing damaged drywall.

For more in depth instructions on basic drywall repair visit http://www.single-family-home-remodeling.com/drywall-repair.html Article Source: http://EzineArticles.com/?expert=David_Altman